|
|
The Team
Supports |
|
 |

RSS News Feed
| |
Castrol Bike Care
Normal sales to UK ONLY MAINLAND ONLY. For
BT / IOM / IOW and Northern Ireland postcodes please call. For EU
countries please email with delivery details and we will give you a quote.

We
do not ship to NON EEC / NON EU Countries.
|
 |
Foam Air Filter OilOil for extended
life of filters and engine
Castrol Foam Air
Filter Oil has been developed to
ensure excellent performance for
motorcycle filters. It has been
tested in both controlled field
conditions and bench test procedures
according to BSI 1701 (ISO 5011).
Features
- High
filtering efficiency for
extended filter and engine life
- Maintains air
flow for instant engine response
and maximum power output

|
|
 |
Foam Air Filter CleanerCleaner for all
type of motorcycle filters
Castrol Foam Air
Filter Cleaner is a fast drying
cleaning fluid, designed for all
types of motorcycle and scooter
filters made from plastic sponge and
metal gauze.
Features
- Powerful,
rapid cleaning action for use on
sponge and metal gauze filters
- Fast removal
of used filter oil and trapped
dirt
- Safe and
effective cleaning method
compared to other techniques and
types of solvents
- Good
compatibility with all plastic
foams used in motorcycle filters
- Fast drying,
to allow immediate application
of new Castrol Foam Filter Oil

|
|
 |
Motorcycle CoolantCastrol Motorcycle
Coolant is a pre-diluted (ethylene
glycol based, fully formulated) heat
transfer fluid, developed to meet
the requirements of all water-cooled
motorcycles and scooters.
Features
- Anti-freeze
performance down to -25°C
- Protection
against corrosion for longer
engine life
- Outstanding
cooling and heat transfer
properties
- Protection of
water system components
- Non-hazardous
to painted surfaces.

|
|
 |
Fork Oil - Mineral based
Castrol Fork Oil is an advanced mineral based suspension fluid designed to provide the optimum damping performance in all on and off road suspensions. Its highly refined base stock and naturally high viscosity index will provide superior anti-fade damping performance over a wide temperature range. Castrol Fork Oil allows air release and anti-fade performance under arduous conditions.
Features
- Resistance to high temperature vapour lock
- Increased braking safety margin when compared to conventional products
- Protection against corrosion and wear, extending the life of the braking system
- Outstanding lubricity for smoother and safer braking.
- SAE15w

|
|
 |
Synthetic Fork OilFULL
SYNTHETIC FORK OIL - SAE 2.5W, 5W,
10W
Castrol Synthetic
Fork Oil is a fully synthetic
suspension fluid designed to provide
the ultimate damping performance in
all on and off road suspensions. Its
synthetic base stock and naturally
high viscosity index will provide
superior anti-fade damping
performance over a wide temperature
range. Castrol Synthetic Fork Oil
allows rapid air release and
superior anti-fade performance under
the most arduous conditions such as
those found in racing. Castrol
Synthetic Fork Oil eliminates
suspension unit “sticking” providing
smooth operation of the suspension.
Features
- Superior
damping performance over a ride
range of high and low
temperatures
- Rapid air
release for maximum anti fade
performance
- Wear
protection for long suspension
component life
- Minimised
metal “sticking” for smooth
damping operation
- Protection
against corrosion of all
internal parts.
TDS for 10W
TDS for 5W
For 20W use TQF
|
|
 |
Castrol DWF
De-watering fluid for engines, ignitions and electrical contacts Castrol DWF is a multi-purpose aerosol penetrator and de-watering fluid for Motorcycles, Cars Trucks, ATV's and Karts.
It provides excellent displacement of moisture from engines, ignition systems and electrical contacts. Protects against corrosion and frees corroded parts.
Features
-
Displaces moisture.
-
Penetrates clean and corroded parts.
-
Protects metal surfaces against rust.
-
Water repellent properties.
-
Helps lubricate inaccessible mechanisms.

|
|
 |
Castrol Chain Cleaner
Advanced cleaner
for “X” or “O” ring chains. Castrol Chain
Cleaner is an extremely efficient
cleaner for motorcycle chains with
and without “O” or “X” rings.
Features

|
|
 |
Metal Parts Cleaner
Aerosol fluid cleaner
designed for metal surfaces of
motorcycles
Castrol Metal Parts Cleaner
is a specially designed aerosol
fluid for removing oil and
grease to clean engine parts as
well as brake discs,
carburettors, handle bars, spark
plugs, electrical switches and
metallic surfaces.
Features
-
High solvency to remove
unwanted petroleum residue
and clean surfaces
-
Powerjet action for
rapid dirt removal
-
High penetration spray
to access the most remote
parts of the motorcycle.

|
|
 |
Greentec Bike Cleaner
New
improved formula
-
Biodegradable cleaner for
resistant dirt on all type of
surfaces
-
Greentec Bike Cleaner has
been developed to ensure fast
and effective cleaning against
the most resistant dirt, along
with superior compatibility with
a wide range of materials
including metals and light
alloys, plastics, rubbers and
paints.
-
The bodywork and frame on modern motorcycles is a mix of
exotic metal alloys and sophisticated plastics, paints and lacquer.
These materials can be sensitive to chemical
products and if the cleaner used is too aggressive, may be permanently damaged with the result that expensive part
replacement is often necessary to restore the original appearance. Whilst formulated to give the best cleaning power
towards even the toughest grease and dirt, Castrol Greentec Bike Cleaner has also been tested for
compatibility with over 30 different materials in order to ensure safe use on the majority of modern motorcycles.
-
New Greentec Bike Cleaner has
been tested by a leading
independent laboratory using a
severe material compatibility
test method. Actual motorcycle
parts were used to check the
fluid performance at
temperatures of up to 80°C for a
period of 24 hrs.
-
Greentec Bike Cleaner has
shown superior material
compatibility when compared with
leading competitors, and showed
no negative effect with any of
the materials tested.
-
*Only components for which
one or more of the product
tested have failed compatibility
test are shown. Additional
materials/components tested
includes: anodized aluminium,
steel, chromed steel, copper,
brass, polyethylene (PE),
polypropylene (PP), polystyrene
(PS), Polyoxymethilene (POM),
Polyamide (PA ABS, PVC,), rubber
seat cover, brake hoses, coolant
hoses, top cases, rear lamps,
indicators.
Directions for use
-
Spray the undiluted cleaner
on surface
-
Wait 1 to 3 minutes
before removing it by
thoroughly rinsing with fresh
water, or by pressurised
water jet.

|
|
 |
Bike Polish
Polish for protection and cleanliness of motorcycle surfaces. Castrol Bike Polish is the new motorcycle cleaner developed to polish painted surfaces, chrome and plastic without the use of water. Castrol Bike Polish renews and protects surfaces and also provides excellent windscreen cleaning.
Features
-
Superior and easy cleaning power without the need for water
-
Refreshes and protects all surfaces restoring original condition
-
Provides excellent insect removal from windscreen
-
Includes UV protective component to reduce discolouration of paintwork in excessive sunlight.
|
|
 |
Silicon Spray
New
product
Silicon for protection and
renovation of plastics and rubbers
Castrol Silicon
Spray is a general purpose silicon
lube for protecting and renovating
plastics and rubber.
Features
-
UV protection against discolouration
-
Refreshes dull/matt surfaces
-
Refreshes and preserves plastics and rubbers
|
|
 |
Castrol Racing Chain Lube
New product
FULLY SYNTHETIC
chain lubricant for on and off-road
bikes. Castrol Chain Lube
is an advanced FULLY SYNTHETIC
motorcycle chain lubricant that sets
a new standard in chain lubrication. It has been
developed to combat corrosion by
means of chemical action and to resist fling off and water
wash out, leaving a uniform layer to protect from aggressive agents.
Features
-
Suitable for
standard, O-Ring and X-Ring
chains.
-
Forms a long
lasting, dry-type
semi-transparent lubricating
film with outstanding resistance
to high speed fling and water
wash-off.
-
Low friction
coating for reduced operating
temperature and prolonged chain
life.
-
Superior
protection against metal
corrosion resulting from
exposure to humidity and salt.
Directions for use
-
Switch off
engine.
-
Place bike in
neutral on centre stand.
-
Fully clean chain
using a copper wire brush and
then clean with Castrol Chain
Cleaner.
-
Allow to dry.
-
Apply evenly
the lube
sparingly to a clean dry chain
from the inside to outside edge
whilst rotating rear wheel
slowly by hand.
-
Leave to dry for
10 - 20 minutes before riding.

|
|
 |
Chain Spray O-Ring
Latest generation
spray lubricant for 0-ring chains. Castrol Chain
Spray O-R is a white, fully
synthetic chain lubricant for
motorcycle “O” ring chains.
Features
-
Outstanding lubrication and protection under extreme conditions
-
Excellent penetration and adhesion for minimal fling loss
-
Rapid evaporation of solvent
-
Resistant to water wash off
-
Protection against corrosion and aggressive environments
-
Reduces frictional properties helping to maximise power transfer and reduce wear.
|
|